How To Cut A 135-degree Angle On A Miter Saw. The Complete Guide
Sommaire
Share it
To avoid wasted materials and delays, it is important to use precise miters. The miter saw is a powerful tool that can be used to trim and cross-cut at different angles. This professional guide will show you how to cut an angle of 135 degrees on a mitersaw.
Steps To Cut A 135-degree Angle On A Miter Saw
It is common to start by determining the spring angle of a crown molding with a framing piece so that you can set your mitersaw or table saw. When two walls are joined with a sharp edge, 135-degree corners will be used.
It is usually more difficult than creating an exact obtuse angle greater than a right angle. For example, a 135-degree miter angles. Our woodworkers have provided the right procedure to help you cut corners at 135 degrees angles and other obtuse angles. A transition piece is possible.
Step 1: Prepare The Miter Saw
First, prepare the saw. Next, set the saw gauge at 22.5 degrees. Adjust the knob for the angle cutter to the right or left at 22.5-degrees. You don’t have to choose which side you start from, as long as the third step is in the opposite direction.
This angle is the best for locking the saw. Make sure the tilt angle is at least 0 degrees. This will allow the saw to cut straight down the length, and not in a bevel shape.
Step 2: Make Sure The Saw Is Properly Placed
Securely clamp your lumber, wood, or longboard to the saw in the position you want. You must ensure that the fence is square. To prevent wood from moving during cutting, you can clamp smaller pieces of wood against the fence. To ensure accurate and quick miter cutting, miter saws feature a 22.5-degree indent.
Step 3: Cut At A Angle Of 22.5 Degrees To The Right
Next, take the first piece of wood and cut it inside. Then move the mitersaw at a 22.5″ angle to the right (or in the opposite direction) of the cut you made in step 1. To measure, you can draw a line. You can draw a line to measure if you have cut to the left in Step 1.
Step 4: Cut At A Angle Of 22.5 Degrees To The Left
Set the miter saw at the same angle on the left as the one on the right. You should now have the second half your cut angles.
After you have cut both pieces of wood perfectly, you can place them together at the cuts. If you do so, they should align perfectly.
Step #5: Measure Angle Alignments
An angle measurement is the final step in how to cut a 135 degree angle on a mitersaw. To determine if your cut is 135 degrees, you will need to use an angle measuring instrument. You should now have a 135 degree miter corner if you followed the steps, especially if your module has a sharp edge. Design will not be affected by a difference of just one or two degrees.
These products can be used to accurately cut:
